Ac Clamp Meter for Continuity Check

AC CLAMP METER 3280-10F

Rugged & Compact, Essential Equipment for Professional Electricians: Measure Current and Voltage with a Single Instrument

Hioki clamp meters are best-in-class measuring devices incorporating Hioki' s expertise in current sensing technology. The 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots.

CAT IV 300 V (Current)
CAT III 600 V (Current)
CAT III 300 V (Voltage)
CAT II 600 V (Voltage)

Using 3280 series AC clamp meters: Introduction to functionality and measurement methods

In addition to AC current measurement, these clamp meters provide voltage and resistance measurement as well as continuity check functionality.
Their compact size, low-profile design, and resistance to both rough handling and extreme temperatures make them essential tools for any electrician.

Key Features

  • Measure the fundamental waveform component using the average rectified method
  • Expanded -25°C to 65°C operating temperature range
  • Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
  • Drop proof design withstands drop from a height of 1 meter

Model No. (Order Code)

3280-10F Average rectified
3280-70F 3280-10F, CT6280 bundled model

Note: The 3280-70F includes both the meter and an AC Flexible Current Sensor.
1. AC CLAMP METER 3280-10F ×1
2. AC FLEXIBLE CURRENT SENSOR CT6280 ×1
3. CARRYING CASE C0205×1

Using 3280 series AC clamp meters: Difference between mean value and true RMS measurement

Measurements taken with the Hioki 3280-10F (which uses the mean value method) and the the Hioki 3280-20F (which uses the true RMS method) are compared.
Observe the difference between readings from these two types of instruments when measuring a distorted waveform that contains harmonic components such as those produced by inverters and switching power supplies.

A pocket clamp meter that can use flexible sensors

When connected to an optional flexible current sensor, the 3280-10F can be used to measure the current flowing in pairs of wires or in tangled or complexly routed wires around which it was not possible to apply a clamp-on sensor in the past.

Essential for electrical work: A thin card tester that fits in the pocket with all the capabilities of a clamp meter

The 3280-10F delivers all the functionality of a clamp meter and card tester in the form factor of the latter. In addition to current measurement, this single instrument delivers voltage measurement, continuity check, and resistance measurement functionality.

A tough, pocket-size clamp meter with an operating temperature range of -25°C to 65°C

The 3280-10F inherits the drop-proof durability of the previous 3280-10 (making it able to withstand being dropped onto concrete from a height of 1 m) and expands that instrument's operating temperature range to -25°C to 65°C (from the previous 0°C to 40°C). As a result, it can be used in even harsher environments.

Basic specifications

Accuracy guaranteed: 1 year

CT6280 Basic specifications

Accuracy guaranteed: 1 year

Included accessories (2)

CARRYING CASE 9398

TEST LEAD L9208

70 cm (2.30 ft) length

Options (5)

C0205 is an included accessory for the CT6280 and 3280-70F.
L4933, L4934: Attach L9208 with the cap removed.

SMALL ALLIGATOR CLIP SET L4934

Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300 V, CAT II 600 V

CONTACT PIN SET L4933

Attaches to the tip of the Test Lead L9207-10/DT4911, L9206, 60V DC/ 30V AC

CARRYING CASE C0205

Soft case

TEST LEADS HOLDER 9209

Secures one end of each test lead to the rear of the meter


Related Products

delucahusloncom.blogspot.com

Source: https://www.hioki.com/global/products/clamp-meters/ac-clamp/id_6589

0 Response to "Ac Clamp Meter for Continuity Check"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel